to Polymers

Polymer materials (Introduction)

Dr. Dmitri Kopeliovich

There are three general groups of polymer materials:

Elastomers

Elastomers are polymers possessing high elasticity - may be reversibly stretched at high degree.

Elastomers consists of long lightly cross-linked molecules.

Common elastomers are:

Elastomers may be strengthened by vulcanization process (heat treatment in presence of chemical agents).

Vulcanization results in increase of cross-linking of the molecules.

Vulcanized elastomers are elastic for small deformations.

(more about Elastomers)

to top

Thermoplastics

Thermoplastics are polymers, which soften (becomes pliable and plastic) and melt when heated. In the melted conditions thermoplastics may be formed by various methods (injection molding, extrusion, Thermoforming).

No new cross-links form (no chemical curing) when a thermoplastic cools and harden.

Thermoplastics may be reprocessed (re-melt) many times.

Common thermoplastics are:


(more about Thermoplastics)

to top

Thermosets

Thermosets are polymers which do not melt when heated.

Thermosets molecules are cross-linked by strong covalent intermolecular bonds, forming one giant molecule.

Cross-linking is achieved in curing process initiated by heat, chemical agents or radiation.

Before curing processing thermoset materials are stored in partially polymerized condition.

Thermosets are stronger and stiffer than thermoplastics.

Common thermosets are:


(more about Thermosets)

to top


Related internal links


to Polymers