Terms of use

Welcome to SubsTech.com (the “Site”). Before you create a new page or edit an existing one you must agree to the terms of use (”Terms”) of the Site. SubsTech reserves the right to change the Terms (except in relation to privacy of the Users) at any time without notice to you (important changes will be announced on main page of the Site). SubsTech may modify or discontinue the Site or any part of it. If you do not accept the Terms please do not use the Site.

License

Content of the Site is licensed under a Creative Commons Attribution 3.0 License.
Authors, submitting their writing works in the Site, retain their copyright. The License does not restrict the authors authors to use the created content.
Content of General articles is licensed under by-nc-sa 3.0 license. (http://creativecommons.org/licenses/by-nc-sa/3.0/), which generally means as follows:

Under the following conditions:

  1. Attribution. You must attribute the work in the manner specified by the author or licensor (but not in any way that suggests that they endorse you or your use of the work).
  2. Noncommercial. You may not use this work for commercial purposes.
  3. Share Alike. If you alter, transform, or build upon this work, you may distribute the resulting work only under the same or similar license to this one.


Content of Material Table page is licensed under by-nc-nd 3.0 license (http://creativecommons.org/licenses/by-nc-nd/3.0/), which generally means as follows:

Under the following conditions:

  1. Attribution. You must attribute the work in the manner specified by the author or licensor (but not in any way that suggests that they endorse you or your use of the work).
  2. Noncommercial. You may not use this work for commercial purposes.
  3. No Derivative Works. You may not alter, transform, or build upon this work.

Accuracy of the Material Data

We do not warrant accuracy of the Material Data (chemical composition, properties, structure, applications) contained in the Site. Material properties depend on various factors: exact chemical composition, dimensions, parameters of manufacturing methods, tempering conditions etc. They are valid for particular products of particular suppliers and may be used only for approximate estimations and comparative material selections. Properties presented in the Material Data tables are not for design purposes. Your engineering calculations and final material selection should be based on the test results and data provided by the relevant material supplier.

Advertising

Privacy and Security

SubsTech is committed to protecting the privacy of the Users:

Limitation of liability

SubsTech excludes all responsibility and liability in relation to:

Disclaimer of Warranties